A 360° video from TyreSafe depicts the startling difference in braking distances between tyres just below the legal limit and those with full tread. Called TyreSafe 360 the film has been devised to immerse viewers in the action so they can safely experience for themselves the lack of control provided by tyres with dangerously low tread depth. The film builds to a dramatic climax as the test car careers through a purpose-built wall – out of control and unable to stop in time.
Following the controlled incident, viewers can see for themselves how much further it has travelled before coming to a stop compared with the car equipped with almost new tyres – a full 14m, practically a bus length.
TyreSafe 360 is best appreciated using a smartphone and virtual reality (VR) goggles, allowing viewers to simply turn their heads to get an all-round view of the action. It is available as an app from the Apple Store or Google Play and once downloaded it does not require an internet connection to play as the footage is embedded. Alternatively, visit TyreSafe’s YouTube channel and use keyboard, mouse, touchpad or touchscreen to control the direction of viewing.
Stuart Jackson, Chairman, TyreSafe, said: “TyreSafe 360 brings to life the risks of driving with tyres approaching, or just under, the minimum legal tread limit in a manner which has never been done before. Viewers watching using VR goggles especially will be far closer to the real-world experience of being out of control, as the braking and steering systems of the car can do nothing to help them avoid an impact in the wet conditions. The vulnerability and helplessness a driver feels under these circumstances is something we hope viewers take onboard after watching and that they are encouraged to carry out the regular tyre safety checks to minimise the chances of being involved in a similar incident on the road.
“As the film concludes, and this year’s Tyre Safety Month reminds Britain’s motorists – Don’t chance it – check it.”
TyreSafe recommends drivers check their tyres at least once a month and before long journeys. There are three key elements to check:
Air pressure: The vehicle manufacturer will typically provide two air pressure levels, one for light loads and the other for when full laden. Overinflation causes accelerated wear in the centre of the tyre, while underinflation causes wear on the outside edges. Both will negatively impact on the way a vehicle corners and brakes and increase the risks of tyre damage while underinflation also increases fuel consumption. You can find your vehicle’s correct pressures in the filler cap, owner’s manual, door shut or at tyresafe.org
Condition: Lumps and bumps maybe signs of structural damage, and objects embedded in a tyre can lead to catastrophic failure on the road. If any of these are present, the tyre should be checked immediately by a professional.
Tread depth: The minimum legal limit is 1.6mm. As a guide to how close a tyre’s tread depth is to this limit, simply insert a 20p into the main grooves across its centre section and at several points around the circumference. If the rim of the 20p is visible or close to being visible at any point, the tyre maybe illegal, endangering the driver and other road users, and should be inspected by a professional.
This article was posted on 19th October 2016 in Latest News and tagged: 360, App, automotive, car, condition, driving, part worn, pressure, TPMS, tyre pressure, tyres